Aspect Control Signal
Some features are not available on all models.
Programmes usually contain an “Aspect Control Signal”. (Widescreen signal,
Control signal through HDMI terminal)
In Auto mode, aspect mode will appear in the top left of the screen if a
Widescreen signal (WSS) or a Control signal through HDMI terminal is found.
The aspect switches to the appropriate ratio.
Watching > For best picture > Aspect
■ Available conditions
●
Satellite terminal (WSS only)
Valid input signal format:
Satellite
●
Terrestrial / cable terminal (WSS only)
Valid input signal format:
DVB-C
DVB-T / DVB-T2
Invalid input signal format:
PAL 525/60 6.0 MHz
M.NTSC 6.0 MHz
●
AV IN (VIDEO) terminals
Valid input signal format:
PAL
PAL 525/60*
M.NTSC*
NTSC*
* : Control signal through HDMI terminal only
- 84 -
To Next Page
Loading...
