Panasonic TY-WK42PV7 - Securing the display; Removing the display; Remove fixing screws; Detach display from bracket

12
English
Installation procedure
Horizontal installation Vertical installation
Horizontal installation Vertical installation
• Tighten the fixing screws at top and bottom
for vertical installation.
• Tighten the fixing screws at left and right for
horizontal installation.
Removing the display
1. Remove the two fixing screws
which are screwed into the wall-
hanging bracket.
• Horizontal installation:
Remove left and right fixing
screws.
• Vertical installation:
Remove top and bottom fixing
screws.
2. While lifting up the bottom of
the display
Pull it forward to detach the
insulating spacers at the
bottom
Then lift up the display.
5. Securing the display.
Fixing screw mounts
(Top)
Fixing screw mounts
(Bottom)
Wall-hanging bracket
Wall-hanging bracket
Fixing screw mounts
(left and right)
Fixing screws
(left and right)
Insulating
spacer
Insulating
spacer
Fixing screws
(Top and
Bottom)
• Be sure to tighten the fixing screws to prevent the display from detaching from the wall-hanging bracket.
Caution