11
LiquidtubeID:9.52mm LiquidtubeID:9.52mm
SuctiontubeID:15.88mm
Front side
Service cover
SuctiontubeID:15.88mm
DischargetubeID:12.7mm
Hanging hook
Cabtyre cable (5 m)
9P connector
Unit: mm
Fig. 3-11
Note: This figure shows the unit with suspension fittings attached.
Howtousethettings
●
Be sure to attach the supplied hangingn hook.
Flat washer
Hanging bolt (3/8")
(field supplied)
Nut
(field supplied)
M4 screw (M4 x 12)
Never use a longer screw
other than the supplied screw.
This may damage the tube
surface, causing refrigerant leakage.
Hanging hook
Solenoid valve kit
Fig. 3-12