30
(11) Remove the Scanner Glass (341).
(12) Remove the Stamp Head Assembly.
Note:
Before reassembling, clean both sides of the
Scanner Glass (341) with a soft cloth, soaked with
isopropyl alcohol.
(13) Release the hook on the drive gear.
(14) Remove the B31B61 Drive Gear (314).
(15) Remove the Idle Shaft (331) and the B18 Drive
Gear (348).
Note:
Apply Molykote EM-50L Grease to the Idle Shaft
(331).
(16) Remove 2 Latch Coil Springs (303).
(17) Remove 2 Latches (302).