- 22 -
Playback
Picture Settings
Dynamic Range Conversion Adjustment
When this unit is connected to a TV that does not
support HDR (High Dynamic Range) input, HDR
video is output converting to a SDR (Standard
Dynamic Range) video signal. If you set a smaller
value, their contrast will be reproduced more
faithfully, but the entire screen will appear darker.
To increase the brightness, set a larger value.
Picture Mode
Select the picture quality mode during play.
y
If you select “User”, you can change settings in
“Picture Adjustment”.
Picture Adjustment
Specic picture quality settings can be changed.
Progressive
Select the method of conversion for progressive
output to suit the type of material being played.
y
If the video is disrupted when “Auto” is selected,
select either “Video” or “Film” depending on the
material to be played back.
Reset to Default Picture Settings
Return picture settings to the factory defaults.
3D Settings
Signal Format
Original
Keep original picture format.
Side by side
3D picture format comprising of
left and right screens.
Graphic Display Level
3D position for the Option menu or message
screen, etc. can be adjusted during 3D playback.
To Next Page
Loading...
Need help?
General
