- 20 -
Playback
Search
While playing, press [SEARCH6] or
[SEARCH5].
≥ Ultra HD Blu-ray, MKV, MP4 and MPEG2:
Audio is not heard.
Slow motion
While paused, press [SEARCH6] or
[SEARCH5].
≥ BD-Video and AVCHD: [SEARCH5] only.
≥ MKV, MP4 and MPEG2: Not effective.
The speed increases up to 5 steps.
≥ Music, MP3, etc.: The speed is fixed to a single
step.
≥ Press [1PLAY] to revert to normal playback
speed.
While playing or paused, press [:] or
[9].
Skip to the title, chapter or track.
While paused, press [2] (2;) or [1] (;1).
≥ Each press shows the next frame.
≥ Press and hold to change in succession forward
or backward.
≥ Press [1PLAY] to revert to normal playback
speed.
≥ BD-Video and AVCHD: Forward only.
≥ MKV, MP4 and MPEG2: Not effective.
Press [AUDIO].
You can change the audio channel number or
soundtrack language, etc.
Press [TOP MENU] or [POP-UP MENU].
Select the item and press [OK].
While playing HDR video, press [HDR
SETTING].
When HDR (High Dynamic Range) video is output to
a connected HDR-compatible TV, a menu is
displayed, allowing you to adjust the brightness of
the entire screen.
(> 4, 27)
Press [
2, 1]
to adjust
the setting.
Press [RETURN] to exit.
While playing, press [PLAYBACK INFO.].
You can check the detailed video content*
playback status.
≥ When outputting HDR material tagged with
metadata, such as Ultra HD Blu-ray content,
press [PLAYBACK INFO.] again to display its
luminance information (HDR10 metadata).
– “–” is displayed if there is no metadata on the media
being played back.
– “–” is displayed when HDR metadata is not output from
the HDMI VIDEO OUT terminal, such as during Dolby
Vision output.
Press [RETURN] to exit.
* BD-Video, DVD-Video, MKV, MP4, MPEG2 (except
Network Contents)
While playing, press [STATUS].
The status messages give you information about
what is currently being played. Each time you
press [STATUS], the display information may
change or disappear from the screen.
≥ Depending on media and contents, the display
may change or not appear.
A Displayed when an HDR (High Dynamic
Range) video signal is being output.
– “HDR (High Dynamic Range: HLG to PQ
Conversion)” : The format of the HDR video
is converted from HLG to PQ
– “Dynamic Range Conversion Output” : The
video signal is converted to SDR (Standard
Dynamic Range)
B
T: Title, P: Programme, C: Chapter, PL: Playlist
C Elapsed time in the title
D Method of HDR (High Dynamic Range) video
E Output resolution/Frame rate
F Current position
G Total time
Search/Slow motion
Skip
Frame-by-frame
Changing soundtrack
Show top menu/pop-up menu
Adjust the screen brightness
Show the status messages
Video attribute information of video
content*
Audio attribute information of video
content*
HDMI(VIDEO) output information
HDMI(AUDIO) output information
Play
4K
Ultra HD Blu-ray
B
A
T1 C1
G
F
D E
ラュンドヱヲナ
ヰㄖㄕㄑㄖㄕホフレバビフㄑ
HDR (High Dynamic Range)
DP-UB820-EG(DACH)-TQBS0213-3_eng.book 20 ページ ２０１９年３月１９日 火曜日 午後７時４分
To Next Page
Loading...
Need help?
General
