VIERA
Link™
"HDAVI ControFM"
HDMI connections to some Panasonic equipment allow you to interface automatically.
(p.
35)
~
This function may not work normally depending on the equipment condition.
II
The equipment can
be
operated by other remote controls with this function
on
even if the TV
is
in
Standby mode.
II
Image or sound may not
be
available for the first few seconds when playback starts.
• Image or sound may not
be
available for the first few seconds when input mode
is
switched.
II
Volume function will be displayed when adjusting the volume of the equipment.
• If you connect equipment that has "HDAVI Control 2 or later" function to the TV with an HDMI cable, the sound from the
DIGITAL AUDIO OUT terminal can
be
output as multi-channel surround.
• "HDAVI Control
5"
is
the newest standard (current as
of
December, 2010) for the HDAVI Control compatible equipment.
This standard
is
compatible with the conventional HDAVI equipment.
HDMI
connection
HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting
the TV unit and
HD
devices.
HDMI-compatible equipment (*1) with
an
HDMI or
DVI
output terminal, such as a Cable or Satellite box or a DVD player, can be
connected to the HDMI connector using an HDMI compliant (fully wired) cable.
• HDMI is the world's first complete digital consumer
AV
interface complying with a non-compression standard.
• If the external equipment has only a
DVI
output, connect to the HDMI terminal via a
DVI
to HDMI adapter cable (*2).
II
When the
DVI
to
HDMI adapter cable
is
used, connect the audio cable to the audio input terminal.
• Audio settings can be made
on
the "HDMI1 in", "HDMI 2 in", "HDMI 3 in" or "HDMI 4 in" menu screen.
(p.
53)
Applicable audio signal sampling frequencies (L.PCM): 48 kHz,
44.1
kHz,
32
kHz
(*1): The HDMI logo
is
displayed on an HDMI-compliant device.
(*2): Enquire at your local digital equipment retailer shop.
(
Caution)
• Use with a
PC
is
not assumed.
• All signals are reformatted before being displayed
on
the screen.
• If the connected device has
an
aspect adjustment function, set the aspect ratio to "16:9".
• These HDMI connectors are "type
A".
• These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.
• A device having
no
digital output terminal may be connected to the input terminal
of
either "COMPONENT", or "VIDEO" to
receive analog signals.
• The HDMI input terminal can be used with only the following image signals: 480i, 480p,
nop,
1080i and 1080p.
Match the output setting of the digital device.
• For details of the applicable HDMI signals, see
p.
60.
DIGITAL AUDIO OUT
terminal
You
can enjoy your Home theater
by
connecting a Dolby Digital
(5.1
channel) decoder and "Multi Channel" amplifier to the
DIGITAL AUDIO OUT terminals.
(
Caution)
'I
Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable optical
output.
• When
an
ATSC channel
is
selected, the output from the DIGITAL AUDIO OUT jack will
be
Dolby Digital. When
an
NTSC
channel
is
selected, the output will be PCM.
• When playing a movie on
SO
Card Movie player, when the sound has been recorded
in
Dolby Digital, the output from the
DIGITAL AUDIO OUT terminal will be Dolby Digital. When the sound
is
recorded
in
other formats, the output will be PCM.
Closed
Caption
(CC)
• For viewing the
CC
of
digital broadcasting, set the
aspect
to
FULL
(If viewing with H-FILL, JUST,
ZOOM
or
4:3;
characters
might
be cut off).
•
The
CC
can be displayed on the
TV
only
when
the receiver (such
as
a
Cable
box
or
satellite receiver) has the
CC
set
to ON within the device itself.
Check
with
your
Cable
or
Satellite provider for instructions.
The
TV's
CC
button
does
not
operate the Satellite
or
Cable box's
CC
function.
• If the
CC
is set
to
On
on both the receiver and
TV
when the signal is 480i (except for the HOMI connection), the
CC
may
overlap on the TV.
•
If
a digital program is being output in analog format, the
CC
data will also
be
output in analog format.
•
If
the recorder
or
output
monitor is connected to the TV, the
CC
needs
to
be
set up on the recorder
or
output monitor.
:::J
0'
.,
3
Q)
!::!:
o
:::J
59
To Next Page
Loading...
