Watching TV
17
Change aspect ratio
Enjoy viewing the image at its optimum size and aspect.
Press repeatedly until you reach the desired mode
ASPECT
■ If Aspect Selection list is displayed
1 Display Aspect Selection list 2 While the list is displayed, select the mode
ASPECT
Aspect Selection
16:9
14:9
Just
4:3
4:3 Full
Zoom1
Zoom2
Zoom3
Select
EXIT
RETURN
Change
Aspect Selection
16:9
14:9
Just
4:3
4:3 Full
Zoom1
Zoom2
Zoom3
change
select
[16:9] [14:9] [Just]
Directly displays
the image at 16:9
without distortion
(anamorphic).
Displays the image
at the standard 14:9
without distortion.
Displays a 4:3 image
full-screen. Stretching
is only noticeable at the
left and right edges.
[4:3] [4:3 Full] [Zoom1]
Displays the image
at the standard 4:3
without distortion.
Displays a 4:3 image
enlarged horizontally
to fit the screen.
●
Digital TV mode or
HD signal
Displays a 16:9
letterbox or 4:3 image
without distortion.
[Zoom2] [Zoom3]
Displays a 16:9
letterbox (anamorphic)
image full-screen
without distortion.
Displays a 2.35:1 letterbox (anamorphic) image
full-screen without distortion. At 16:9, displays the
image at its maximum (with slight enlargement).
Note
●
Only [16:9] and [4:3 Full] are available in Digital TV mode.
●
Only [16:9] and [4:3] are available in PC input mode.
●
Aspect is fixed to [16:9] when [Viewing Mode] is set to [Game] in the Picture Menu.
●
Aspect mode can be memorised separately for each SD (Standard definition) and HD (High definition)
signals except in Digital TV mode.
[Region Select] - Adjust the standard time [Daylight Saving Time] - Adjust for Summer Time
Select the region where you live to adjust the
standard time.
●
The time contained in the broadcast signal is
UTC (Universal Time coordinated) formally
known as GMT (Greenwich Mean Time).
Select time offset from the standard time for
Summer Time.
●
Normally select [Auto].
●
If there is a gap between displayed time and actual
time, set this function.
Region Standard time
Daylight Saving Time: Auto
(During Summer Time)
NSW / ACT
+10:00 +11:00
Victoria
Queensland +10:00
South Australia +9:30 +10:30
Western Australia +8:00
Northern Territory +9:30
Tasmania +10:00 +11:00
(Based on GMT)
●
These items can be set from [Other settings] in the Setup Menu. (p. 27)
TH-L32C30A-EN.indd 17TH-L32C30A-EN.indd 17 3/3/2011 4:07:24 PM3/3/2011 4:07:24 PM
To Next Page
Loading...
