How to Use the Menu Functions
24
Speaker Distance to
Wall
• Over 30cm
• Up to 30cm
Adjust the low frequency sound
●
If the space between the back of TV and wall is over 30 cm, [Over
30cm] is recommended.
●
If the space between the back of TV and wall is within 30 cm, [Up to
30cm] is recommended.
MPX
• Stereo
• Mono
• M1
• M2
Select multiplex sound mode (if available)
●
[Stereo]: Use this normally
●
[Mono]: When stereo signal cannot be received
●
[M1] / [M2]: Available while mono signal is transmitted
SPDIF Selection
• Auto
• PCM
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from HDMI2
terminal
[Auto]: Dolby Digital is output as Dolby Digital Bitstream. HE-AAC and
MPEG are output as PCM.
[PCM]: Digital output signal is fixed to PCM.
●
Video mode (p. 37)
●
Amplifier with ARC (Audio Return Channel) only
HDMI1 / 2 Input
• Digital
• Analogue
Select to fit the input signal (p. 51)
[Digital]: HDMI cable connection
[Analogue]: HDMI-DVI adaptor cable connection
●
HDMI input mode only
Reset to Defaults
Press the OK button to reset settings of the present [Mode], [Balance],
[Headphone Volume] and [Surround] in the Sound Menu to the default
To Next Page
Loading...
