Technical Information
83
Network
On screen messages
Message Meaning / Action
An internal error occurred.
•
Check the settings. (p. 61 - 64)
Cannot read file
•
The file is broken or unreadable. Check applicable data
format. (p. 81 - 82)
Communication with the server
failed.
•
This might be a problem of the media server. Read the
manual of the server software.
Connection to the server failed.
•
Check the connections and settings. (p. 60 - 64)
Server not found
•
There is no available media server on your home network.
Check the connections and settings.
(p. 60 - 64)
The software update is not
completed.
•
Network download failed. Check the connections and
settings. (p. 60 - 64)
USB connection
•
It is recommended to connect the USB Flash Memory directly to the TV’s USB ports.
•
Some USB devices or USB HUB may not be used with this TV.
•
You cannot connect any devices by using USB card reader.
•
You cannot use two or more same kind of USB devices simultaneously except USB Flash Memory.
Note
•
Additional information for USB devices may be on the following web site. (English only)
http://panasonic.jp/support/global/cs/tv/
USB Keyboard
•
A USB Keyboard which requires a driver is not supported.
•
Characters may not be displayed correctly on the TV screen depending on the connected keyboard or
the keyboard layout setting.
•
Some of the keys of USB keyboards correspond to the operation of the remote control.
USB Keyboard Remote Control USB Keyboard Remote Control
↑ / ↓ / ← / →
Cursor buttons F2 VIERA TOOLS
Enter OK F3 MENU
Backspace BACK / RETURN F4 INPUT (AV)
Esc EXIT F5 / F6 Channel Down / Up
0 - 9 / Character Numeric buttons F7 / F8 Volume Down / Up
F1 GUIDE F9 / F10 / F11 / F12 Coloured buttons
Gamepad
•
Check the gamepads that have been tested for the performance with this TV at the following website.
(English only)
http://panasonic.jp/support/global/cs/tv/
•
Some of the keys of gamepads correspond to the operation of the remote control.
Select Start
1011
1
7 69 8
2
3
4
5
Example :
Remote Control Remote Control
1 Volume Up / Down 7 VIERA TOOLS
2 Channel Up / Down 8 EXIT
3 GUIDE
9
INPUT
(AV)
4 OK
5 BACK / RETURN 10 MENU
6 VIERA Connect 11 Cursor buttons