Basic Connection
9
Rear of the TV
Mains lead
RF cable
AC 110-240 V, 
50 / 60 Hz
Satellite dish
Satellite cable
Aerial
Fully wired HDMI 
compliant cable
Set top box
Note
• 
Keep the space between the TV and RF cable to prevent distorted image.
• 
Do not put the RF cable close to the mains lead to avoid noise.
• 
Do not place the RF cable under the TV.
• 
To obtain optimum quality picture and sound, an aerial, the correct cable (75 
Ω
 coaxial), and the 
correct terminating plug are required.
• 
If a communal aerial system is used, you may require the correct connection cable and plug between 
the wall aerial socket and the TV.
• 
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial 
system for your particular area and the accessories required.
• 
Any matters regarding aerial installation, upgrading of existing systems or accessories required, and 
the costs incurred, are the responsibility of you, the Customer.
• 
To obtain optimum quality picture, select either an Aerial or a cable TV network.
• 
VIERA Link connection   (p. 61)
• 
Other equipment connection   (p. 66 - 68, 78)
• 
Read the manual of the equipment, too.
thl42e30gseng0625.indb9thl42e30gseng0625.indb9 2011/03/0913:29:572011/03/0913:29:57