56
On screen messages
Sending Preset Data Please wait !
•
Q-Link or VIERA Link programme download is in progress.
Message Meaning / Action
Tuner Locked
Please stop recording to operate
•
If you want to unlock, cancel Direct TV Recording (p. 43 and p. 45)
or Timer Programming (p. 38).
Timer incorrect !
•
Set Start and End times in Timer Programming correctly (p. 39).
Timer Event Due to Start
DVB 1: BBC1 has been
Programmed for recording at 20:00
•
This message will appear 2 minutes before timer programming
event due to start.
Software successfully updated
Press EXIT to continue
•
The software updating is fi nished.
Software Update failed. Please try again later.
Press EXIT to continue
•
Perform “System Update Search Now” in System Update (p. 29).
If this is still unsuccessful, there may not be any new software
available.
Shipping condition completed.
TV can now be switched off.
•
“Auto Setup” will automatically start when Mains power On / Off
switch is next turned On. (p. 10)
Please check settings and connections on
HDMI devices.
•
Communication error in VIERA Link function (p. 44).
Timer already expired !
•
Starting time in Timer Programming is already past. Set correctly
(p. 39).
Recording this service now
•
The recorder is recording the programme signal from its own tuner.
You can turn the TV off and leave the equipment recording in the
normal way.
Please wait.
•
A function is in progress.
Unable to download, Check Equipment
•
The tape or disc is active. Stop the equipment and try again.
PIN incorrect !
•
The PIN number you entered is wrong.
No Signal
•
Check the connection of the RF cable.
No Recording - Unknown reason
•
The recording may not be performed. Check the equipment.
•
Disc or tape may be full.
No Service
•
The broadcaster has stopped the service.
To Next Page
Loading...
