FAQs, etc.
•
Technical Information
Signal name
Aspect modes
16:9 Just 4:3 4:3 Full Zoom1 Zoom2 Zoom3
TV/AV1/AV2/
AV3/AV4
PAL
OOO
-
OOO
PAL 525/60
OOO
-
OOO
NTSC 4.43
OOO
-
OOO
NTSC 3.58
OOO
-
OOO
Component/HDMI
525(480)/60i
OOO
-
OOO
525(480)/60p
OOO
-
OOO
625(576)/50i
OOO
-
OOO
625(576)/50p
OOO
-
OOO
750(720)/50p
OOOOOOO
750(720)/60p
OOOOOOO
1125(1080)/50i
OOOOOOO
1125(1080)/60i
OOOOOOO
1125(1080)/50p
OOOOOOO
1125(1080)/60p
OOOOOOO
1125(1080)/24p
OOOOOOO
PC input
O
-
O
----
39
Aspect Ratio
Note
•
The ratio varies depending on the programme, etc. If the ratio is greater than the standard “16:9”, black bands
may appear at the top and bottom of the screen.
•
If the screen size looks unusual when a widescreen-recorded programme is played back on a VCR, adjust the
tracking of the VCR. (See the VCR manual.)
•
To select the ratio manually: (Only “16:9” or “4:3” in PC mode)
The optimum size and aspect can be chosen, and you can enjoy fi ner images. (p. 13)
16:9
Directly displays the image at “16:9”
without distortion (anamorphic).
Zoom3
Displays a “2.35:1” letterbox (anamorphic)
image full-screen without distortion. At
“16:9”, displays the image at its maximum
(with slight enlargement).
4:3
Displays the image at the standard “4:3”
without distortion.
Zoom1
Displays a “16:9” letterbox or “4:3” image
without distortion.
Zoom2
Displays a “16:9” letterbox (anamorphic)
image full-screen without distortion.
Just
Displays a “4:3” image full-screen.
Stretching is only noticeable at the left
and right edges.
4:3 Full
Displays a “4:3” image enlarged
horizontally to fi t the screen.
•
HD signal only
To Next Page
Loading...
