Panasonic Viera TX-L32C3B - Specifications

Specifications
79
Specifications
TX-L32C3B
Power Source AC 220-240 V, 50Hz
Rated Power Consumption 90W
Standby Power
Consumption
0.3 W
10.3 W (With monitor out recording)
Dimensions (W × H × D)
779 mm × 531 mm × 207 mm (With Pedestal)
779 mm × 497 mm × 84 mm (TV only)
Mass
9.5 kg Net (With Pedestal)
8.5 kg Net (TV only)
Display panel
Aspect Ratio 16:9
Visible screen size
80 cm (diagonal)
697 mm (W) × 392 mm (H)
Number of pixels 1,049,088 (1,366 (W) × 768 (H))
Sound
Speaker (160 mm × 42 mm) × 2, 8 :
Audio Output 20 W (10 W + 10 W), 10% THD
Headphones M3 (3.5 mm) stereo mini Jack × 1
Receiving Systems /
Band name
DVB-T / T2 Digital terrestrial services.
PAL I UHF E21-68
PAL 525/60
Playback of NTSC tape from some PAL Video recorders (VCR) or
NTSC disc playback from DVD player and recorder.
M.NTSC Playback from M.NTSC Video recorders (VCR).
NTSC (AV input only) Playback from NTSC Video recorders (VCR).
DVB-T Digital terrestrial services.
PAL I
VHF A -J UHF E21 - E69
CATV S1 - S20 CATV S21 - S41 (Hyperband)
PAL 525/60
Playback of NTSC tape from some PAL Video recorders (VCR) or
NTSC disc playback from DVD player and recorder.
M.NTSC Playback from M.NTSC Video recorders (VCR).
NTSC (AV input only) Playback from NTSC Video recorders (VCR).
Aerial input
UHF VHF / UHF
Operating Conditions
Temperature: 0 °C - 35 °C
Humidity: 20 % - 80 % RH (non-condensing)
Connection Terminals
AV1 (SCART) 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, Q-Link)
AV2 input
VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 :)
AUDIO L - R RCA PIN Type × 2 0.5 V[rms]
COMPONENT input
Y 1.0 V[p-p] (including synchronization)
P
B, PR ±0.35 V[p-p]
HDMI 1 / 2 input
TYPE A Connectors
HDMI2 : HDMI (Version 1.4 with Audio Return Channel)
t
This TV supports “HDAVI Control 5” function.
Card slot
SD Card slot × 1
Common Interface slot × 1
ETHERNET RJ45, IEEE802.3 10BASE-T / 100BASE-TX
DIGITAL AUDIO OUT PCM / Dolby Digital / DTS, Fiber optic
t
Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
t
This equipment complies with the EMC standards listed below.
EN55013, EN61000-3-2, EN61000-3-3, EN55020, EN55022, EN55024