Panasonic Viera TX-L32E3B - Displaying PC Screen on TV

Displaying PC Screen on TV
51
Displaying PC Screen on TV
The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected.
t
To connect PC p. 68
EXIT
DIRECT TV REC ASPECT
OPTION RETURN
MENU N
INPUT
TV AV

To return to TV
TV
1
Select the external input
AV
2
Select [PC]
Input Selection
AV1
AV2
COMPONENT
HDMI1
PC
HDMI2
HDMI3
TV
SD Card
access
select
t
Corresponding signals p. 73
t
If “H-freq.” or “V-freq.” is shown in red,
the signals may not be supported.
 PC menu setting (changed as desired)
t
To make settings “How to Use Menu Functions” (p. 27)
Menu Item Adjustments / Configurations (alternatives)
Picture
Advanced Settings
White Balance
R-Gain Adjusts the white balance for red areas
G-Gain Adjusts the white balance for green areas
B-Gain Adjusts the white balance for blue areas
R-Cutoff Adjusts the white balance for red areas
G-Cutoff Adjusts the white balance for green areas
B-Cutoff Adjusts the white balance for blue areas
Reset to Defaults Press the OK button to reset to the default White Balance
Gamma
Gamma
Switches the gamma curve [1.8] / [2.0] / [2.2] / [2.4] / [2.6]
t
Please note the numerical values are reference for the adjustment.
Reset to Defaults Press the OK button to reset to the default Gamma
Setup
PC Setup
Input Resolution
Switches to a wide view
t
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
t
Options change depending on signals
Clock Set to the minimum level if noise occurs
H-pos Adjusts horizontal position
V-pos Adjusts vertical position
Clock Phase
Eliminates flicker and distortion
t
Adjust after Clock adjustment
t
Set to the minimum level if noise occurs
Sync
Chooses another synchronous signal if the image is distorted [H & V] / [On Green]
t
H & V : by the horizontal and vertical signals from your PC
On Green : by the green signal from your PC (if available)
Reset to Defaults Press the OK button to reset to the default PC Setup settings
t
Other items p. 28 - 32
Note
t
For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3) by using HDMI cable (p. 72).