Tuning and Editing Channels
49
Update DVB channel automatically [Update Channel List]
You can add new channels, delete removed channels, update channel name and position automatically to the channel
list.
CH 5 69
DVB-T Update Channel List
Progress
This will take about 3 minutes.
CH Channel Name Type Quality
The channel list is updated while keeping your settings in [Favourites Edit],
[Channel List], [Child Lock], etc.
Depending on the signal condition, the update may not work properly.
Display a notification message [New Channel Message] (DVB)
Selects whether to give a notification message when a new DVB channel is found.
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
Selecting OK will perform [Update Channel List].
Check DVB signal [Signal Condition]
Selects a channel and checks the DVB signal condition.
A good Signal Strength is not an indication of suitable signal for DVB reception.
Use the Signal Quality indicator as follows.
Green bar: Good
Yellow bar: Poor
Red bar: Bad (Check the Terrestrial aerial or cable)
To change the channel
Example:
70 CBBC Channel
90
80
%
%
0.00E+00
Wenvoe
802,00 MHz, 64 QAM, 6940 kS/s
DVB-C Signal Condition
Signal Quality
Channel Name
Signal Strength
Bit Error Rate
Network Name
Parameter
These bars show the maximum signal value of the selected
channel.
To Next Page
Loading...
