Panasonic Viera TX-L32U3B

How to Use Menu Functions
30
Menu Item Adjustments / Configurations (alternatives)
Sound
Audio Description Menu
Audio Description
Useful for visually-impaired viewers [Off] / [Auto]
Set to “Auto” to activate the description sound track if available
t
The availability of audio description sound track is indicated by [AD] in the
information banner (p. 15).
t
DVB mode only
Volume
Adjusts the volume for Audio Description
t
DVB mode only
Speakers
Set to [On] to activate the description sound track from TV speakers [Off] / [On]
t
DVB mode only
Headphones
Set to [On] to activate the description sound track from headphones [Off] / [On]
t
DVB mode only
Reset to Defaults
Press the OK button to reset the present Sound Mode, [Balance], [Headphone Volume]
and [Surround] to the default settings
Setup
Timer Programming Sets a timer to remind watching or record forthcoming programmes (p.41)
TV Guide Settings
TV Guide View
Changes the layout of TV Guide [Normal] / [Full] / [Info]
[Normal] : Default TV Guide screen
[Full] : Displays channels and programmes full-screen without the operation guide
[Info] : Displays details of the selected programme at the bottom without the
operation guide
GUIDE Plus+
Postcode
Sets your postcode to display advertisements in the GUIDE Plus+ system (p.20)
GUIDE Plus+
Information
Displays the system information of the GUIDE Plus+ system
Off Timer
Sets the time until the TV automatically goes to Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p.16)
Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode
t
If you press the OK button, the following items are set as below :
[C.A.T.S.], [VIERA Link], [Standby Power Save], [Power Save] [On]
[Intelligent Auto Standby] [On (No reminder)]
[Auto Standby]
[2 hours]
Link Settings
VIERA Link Sets to use VIERA Link functions [Off] / [On] (p.61)
AV1 out
Chooses the signal to be transmitted from the TV to Q-Link
[TV] / [AV2] / [Monitor]
[Monitor] : Image displayed on screen
t
Component and HDMI signals cannot be output.
Standby Power Save
Controls the power consumption in Standby mode of the connected equipment to
reduce the consumption [Off] / [On] (p.62)
t
This function is available when [VIERALink] is set to [On].
Intelligent Auto
Standby
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption
[Off] / [On (With reminder)] / [On(Noreminder)] (p.62)
t
This function is available when [VIERALink] is set to [On].
Q-Link Download
Downloads analogue channel information to a Q-Link compatible equipment
connected to the TV