Panasonic VIERA TX-L37DT30B - Page 102

Link Functions (Q-Link / VIERALink)
102
3
Select the equipment you want to access
The type of the connected equipment is displayed.
Select the type of the equipment and access.
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Start
Home Cinema
Recorder
Start
store
select
[Recorder] / [Player] / [Home Cinema] / [Video Camera] / [LUMIX] / [DigitalCamera] / [Other]
•
You can also access directly by using VIERATOOLS “How to Use VIERA TOOLS” (p.36)
•
The displayed item may vary depending on the connected equipment.
•
[Home Cinema] means Player theatre, Blu-ray Disc theatre or Recorder theatre.
•
[Other] means Tuner set top box.
The menu of the accessed equipment (Input mode will be changed automatically)
4
Operate the menu of the equipment
Available VIERA remote control buttons:
(depending on the connected equipment)
1 Set the position to “TV”
DVD/VCR TV
2 Follow the operation guide
•
To display the operation guide
OPTION
If other manufacturers’ equipment is accessed, Setup / Contents Selection menu may be
displayed.
•
When the key words are displayed on colour bar
(red) (green) (yellow) (blue)
Note
•
Some operations may not be available depending on the equipment. In this case use its own
remote control to operate the equipment.
■ If multiple recorders or players are connected
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Start
Home Cinema
Recorder2
Start
[Recorder1-3 / Player1-3]
The number is given from the TV’s lower HDMI terminal number connected to the
same type equipment. For example, two recorders to HDMI2 and HDMI3, in this
case the recorder connected to HDMI2 is displayed as [Recorder1], and the recorder
connected to HDMI3 is displayed as [Recorder2].
■ If you access non-VIERALink equipment
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Start
Home Cinema
Recorder
Start
The type of the connected equipment is displayed.
You can access the menu of the equipment. But you cannot operate it. Use its own
remote control to operate the equipment.