How to Use Menu Functions
32
Menu
Item Adjustments / Configurations (alternatives)
Sound
Audio Description Menu
Audio Description
Narration settings for visually impaired users [Off] / [Auto]
Set to [Auto] to activate the narration sound track when available on the
broadcast.
●
The availability of audio description sound track is indicated by [AD] in the
information banner (p. 16).
●
For DVB mode
Volume
Adjusts the volume for Audio Description
●
For DVB mode
Speakers
Set to [On] to activate the description sound track from TV speakers [Off] / [On]
●
For DVB mode
Headphones
Set to [On] to activate the description sound track from headphones [Off] / [On]
●
For DVB mode
Reset to Defaults
Press the OK button to reset the current Sound Mode, [Balance], [Headphone
Volume] and [Surround] to the default settings
Setup
Timer Programming Sets a timer to record or remind forthcoming programmes (p. 42)
TV Guide Settings
TV Guide View
Changes the layout of TV Guide [Normal] / [Full] / [Info]
[Normal]: Default TV Guide screen
[Full]: Displays channels and programmes full-screen without the operation guide
[Info]: Displays details of the selected programme at the bottom without the
operation guide
Off Timer
Sets the duration of time until the TV automatically goes into Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 17)
Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode
●
If you press the OK button, the following items are set as below:
[C.A.T.S.], [VIERA Link], [Standby Power Save], [Power Save] [On]
[Intelligent Auto Standby] [On (No reminder)]
[Auto Standby] [2 hours]
Link Settings
VIERA Link Sets to use VIERA Link functions [Off] / [On] (p. 62)
AV1 out
Chooses the signal to be transmitted from the TV to Q-Link
[TV] / [AV2] / [Monitor]
[Monitor]: Image displayed on screen
●
Component and HDMI signals cannot be output.
Standby Power
Save
Controls the connected equipment to reduce power consumption in Standby
[Off] / [On] (p. 63)
●
This function is available when [VIERA Link] is set to [On].
Intelligent Auto
Standby
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption
[Off] / [On (With reminder)] / [On (No reminder)] (p. 63)
●
This function is available when [VIERA Link] is set to [On].
Q-Link Download
Downloads analogue channel information to a Q-Link compatible equipment
connected to the TV
Child Lock Applies access control for channels or inputs to prevent unwanted access (p. 44)
To Next Page
Loading...
