Using Media Player
57
■ Video Setup
Setup the settings for Video mode.
●
Menu items and selectable options vary depending on the content.
1 Display the option menu
2 Select [Video Setup]
Option Menu
Video Setup
3 Select the items and set
select
set
Menu
Item Adjustments / Configurations (alternatives)
Video Setup
Video Preview
Sets to start the preview of the title or scene in the thumbnail view [Off] / [On]
●
Image may not be displayed for an instant in the thumbnail view. Set the preview
[Off] to resolve this.
●
Only available in the thumbnail view
Multi Audio
Selects between selectable sound tracks (if available)
●
It may take several seconds to change the sound.
●
Only available during playback
Subtitle
Subtitles On / Off (if available)
●
Only available during playback
Subtitle Text
Selects the font type to display subtitles correctly (if available)
●
Only available during playback
Aspect Change
[Aspect1]: Displays the content enlarged without distortion.
[Aspect2]: Displays the content full-screen.
[Original]: Displays the content original size.
●
You can also change the aspect using the ASPECT button.
●
Aspect change may not work depending on the content.
●
Only available during playback
Repeat
Playback repeat within the title or selected file (depending on the content)
[Off] / [On]
Audio output Settings
You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT or HDMI2 (ARC function)
terminal.
●
To confirm or change the current sound status (see above)
1 Display the menu and Select [Sound]
Main Menu
Picture
Sound
Setup
select
access
2 Select [SPDIF Selection] and set
Sound Menu
2/2
SPDIF Selection
Reset to Defaults
Auto
Reset
select
set
Menu
Item Adjustments / Configurations (alternatives)
Sound
SPDIF Selection
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
and HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto]: Dolby Digital is output as Dolby Digital Bitstream. MPEG is output as
PCM.
[PCM]: Digital output signal is fixed to PCM.
To Next Page
Loading...
