Panasonic VL-GM201A - Mounting monitor station and AC adaptor case

14
Introduction and Installation
4 Mount the monitor station to the mounting bracket.
Push the monitor station down until it is secure.
5 Take out the AC adaptor and the DC terminal from the case.
L Push the arrow mark on the front case, then release from the rear case.
L Take out the cardboard and wood screws. The wood screws are necessary when
attaching the AC adaptor and the DC terminal to a wall (page 16).
1
2
AC adaptor
DC terminal
Arrow mark
GM201A.book Page 14 Monday, April 4, 2005 5:10 PM