6. VL-V901 basic operations
13
6. VL-V901 basic operations
This section explains the basic operations of the VL-V901 lobby station (Video Intercom System for Apartment
Complexes) when used with the VL-MV74/VL-MV75 main monitors.
For further information about features and operations, visit our Web site and find the document:
https://panasonic.net/cns/pcc/support/intercom/v900
VL-V901 basic operations
6.1 Controls
6.1.1 Lobby station
6.2 Lobby station operations
6.2.1 Calling a resident
Entering a room number
1. Enter the resident’s room number.
2. Press MN to call.
Searching by first letter of the name
1. Press MN.
2. Use the keypad to enter the first letter of the
resident’s name.
R Press a key repeatedly to scroll through the
letters assigned to that key.
R Note the hints displayed at the bottom of the
screen.
3. Press MN or MN to search for the desired name.
4. Press MN to call.
Searching through all names
1. Press MN.
2. Press MN or MN to search for the desired name.
3. Press MN to call.
Switching the image displayed on the main monitor
While talking to the main monitor, press M#N to switch
the image displayed on the main monitor from the lobby
station to the camera. To return to the lobby image,
press MN.
6.2.2 Calling a receptionist
1
Press MN.
2 Press MN or MN to search for the receptionist.
3 Press MN to call.
6.2.3 Opening the door by entering an
unlock code
1
Press M#N.
2 Enter the 4-digit unlock code.
3 Press MN.
A Heat sensor
Turns on the display when a visitor is detected.
B Lens cover
C Light
Illuminates subjects in dark environments.
D Display
E Keypad
F Speaker
G Camera lens
H Microphone
I
Search buttons ( and )
Used to select items shown on the display.
J
Cancel button ( )
K
Call button ( )
G
H
I
J
K
A
C
B
D
E
F
SV75_IIQG_en.book Page 13 Thursday, October 17, 2019 2:09 PM
To Next Page
Loading...
