3. Preparation
9
3.2 Using the display
3.2.1 Main monitor - display information
Image viewing screen
A Status icons (page 9)
B Soft key icons (page 8)
Status icons (main monitor)
3.3 Setting the language, date
and time
R The play lamp lights if these settings are not
configured.
1 Press the MN button to turn on the display.
2 Press or to select the desired
language.
3 Press .
4 Press again.
5 Set the date and time.
R Press to select an item (i.e., year,
month, day, etc.).
R Press or to change the setting.
6 When finished, press .
Note:
R The date and time settings may be deleted when
there is a power outage. In this case, reconfigure
the settings.
R The time may become out of sync over time (about
60 seconds per month).
Indicates which doorphone is calling,
monitoring, or on a call.
("1" indicates the device number.)
Indicates there is a call from the doorphone
when monitoring or on a call with another
device.
Indicates that the main monitor is on a call.
Indicates that a doorphone and a PBX
extension are talking.
Indicates that the main monitor is
monitoring.
Indicates that images are being recorded.
Indicates that the doorphone's LED lights
are on.
Indicates that "Press-to-talk" mode is on.
SV75_IIQG_en.book Page 9 Thursday, October 17, 2019 2:09 PM
To Next Page
Loading...
