Panasonic VL-MW250BX - Transferring a call

Doorphone
21
Transferring a call
You can transfer a door call between the main monitor station and the sub monitor station.
LBoth the main monitor station and the sub monitor station can transfer a door call using the same operation.
LWhen using multiple sub monitor stations, you can transfer a door call between the sub monitor stations.
{PAGE}
{MENU}
XX
{TALK} and
indicator
{OFF}
{VOLUME}
{D}
{OFF}
TALK indicator
{
▲
} {▲}
{PAGE}
{TALK}
To transfer a call: To receive a transferred call:
1 While talking to the visitor at the door station,
press {PAGE} and talk to the paged party.
LThe image taken by the door station
disappears, and the TALK indicator fl ashes.
1 When the paging call is heard, press {TALK}
and talk to the paging party.
2 Tell the paged party to receive the door call.
Press {OFF}.
LThe paged call is disconnected, and the paged
party can talk to the visitor.
2 When the image taken by the door station is
displayed, talk to the visitor.
LPress {OFF} to end the call.
N When using multiple sub monitor stations
When you press {PAGE} in step 1, the following is displayed.
Select the party that you want to page:
: Press {VOLUME} (
▲
) or {PAGE} (▲), then
press {MENU} (OK).
: Press {▼} or {▲}, then press {D} (OK).
Note:
LThe visitor cannot hear voices during paging.
LIf the paged party does not answer or you want to return to the door call during paging, press {TALK}.
(Example: Main monitor station)
SENDING DOOR STATION 1
ALL STATIONS
SUB MONITOR STATION 1
SUB MONITOR STATION 2
SUB MONITOR STATION 3
SUB MONITOR STATION 4
SW250BXOI.indb21SW250BXOI.indb21 2010/08/2515:58:322010/08/2515:58:32