Installing the door station
(VL-V554EX)
Attach the door station to the mounting base.
Screws x 4
Name plate
Screw A
•Write the name on the name plate as needed.
Attach the name plate to the door station and
use screw A to secure the front panel.
Important
• On the bottom surface of the door station and the
mounting base, there are holes to allow water to drain. Do
not cover them up when installing.
• When existing wiring (such as chime wires) is used:
- It may contain AC voltage that may cause electric shock
and/or damage the product.
-
To Next Page
Loading...
