9 10
5. Installation Diagram
Trepanning a hole(large than the embedded box size and no more
than the equipment size: 386*166mm).
Insert the embedded box in the hole,and fix it with the cement slur-
ry.
Connect wires, fix the outdoor station on the pre-embedded box and
locked it with M4 screws, Then install finnished.
・The lobby station shall not be installed in the sun exposure, rain,
high temperature, snow/frost， too much dust or strong magne-
tic field environment.
・The lobby station camera shall avoid direct sunlight to prevent
poor image quality.
・When the lobby station is installed, it is recommended that the
camera be about 145cm from the ground.
・The lighting at night shall be taken into account during the insta-
llation of the lobby station.
・The lobby station shall not be installed in the place where the
background noise is more than 70dB.
CAUTION
7. Features and Functions
1. It is made of aluminum die-casting panel and has the explosion-
proofing function.
2. It has the nightlight capturing function.
3. It is equipped with a safety professional camera,has a video image
pre-processing function and has better image quality.
4. Support the equipment displacement alarm.
5. Unlocking modes include QR code and password locking .
8. Calling Residence and Management Center
1. Call resident
2. Call center
The user can call the center through the[security] button on the
panel, and then the guard station can have the video intercom or
unlocking operation.
The user directly inputs the apartment No and the resident can
implement the video intercom or unlocking operation.
External dimensions： 166*386*52mm
Parameters value
Operation voltage： 12-27VDC
Weight： 1.6Kg
Maximum power consumption： 3.5W
Static power consumption： 2.5W
Operating temperature range： -40℃-+70℃
Waterproof and dustproof class： IP54
Explosion-proof class: IK07
6. Technical Parameters
To Next Page
Loading...
