Need help?Do you have a question about the Panasonic WJ-MX50 and is the answer not in the manual?
General| Type | Video Mixer |
|---|---|
| Number of Inputs | 8 |
| Number of Outputs | 2 |
| Video Formats Supported | NTSC, PAL |
| Frame Synchronizer | Yes |
| TBC | Yes |
| RS-422 | Yes |
| Video Inputs Connector | BNC |
| Video Outputs Connector | BNC |
| Switching | Cut, Mix, Wipe |
| Effects | Wipe |
| Audio Inputs Connector | RCA, XLR |
| Audio Outputs Connector | RCA, XLR |
| Control Interface | RS-422 |
| Power Supply | AC 100-240V |
Covers cautions for electric shock, opening covers, and servicing.
Advises on proper earthing, avoiding moisture, and general safety.
Describes the purpose of the WJ-MX50 Production Mixer.
Highlights the mixer's main capabilities and functions.
Provides 'Don'ts' and 'Do's' for safe instrument use and maintenance.
Important notices regarding input signal quality and synchronization.
Details controls for power, wipe positioning, and color adjustment.
Describes controls for audio levels, matte colors, and system indicators.
Covers border selection, soft edges, and image manipulation effects.
Details controls for digital effects like Still, Strobe, and keying functions.
Describes controls for various effects and wipe pattern selection.
Details controls for mix transitions, key effects, and fading.
Covers fade operations, auto-take functions, and bus selection.
Describes headphone, microphone, and title input connectors.
Details various video/audio inputs, outputs, and camera connections.
Details program output signals and auxiliary audio inputs.
Illustrates an A/B roll editing system setup with VTRs.
Lists recommended equipment and provides detailed connection steps.
Steps for powering the unit on and placing it in standby mode.
Explains the Reset and Demo switch modes for operation.
How to select video/audio inputs and program outputs.
Describes using the Matte Generator for background colors.
Adjusting audio levels, mixing sources, and using faders.
Adjusting hue, chroma, and RGB for color correction.
Controlling the position and size of wipe patterns.
Applying negative image and mosaic pattern digital effects.
Applying monochrome, paint, still image, and strobe effects.
Using multi-image, trail, and audio/video synchronized effects.
Performing mix transitions between A-bus and B-bus signals.
Utilizing the NAM effect for specific mixing.
Overview of selecting and combining wipe patterns.
Adjusting wipe borders, edges, and direction.
Using compression, slide, and multi-pattern modifiers.
Using pairing and blinds pattern modifiers.
Selecting specific wipe patterns like straight, corner, diagonal.
Examples of square, triangle, split, and mosaic wipe patterns.
Applying luminance key effects for image layering.
Applying chroma key effects using color information.
Explains the numbering system for wipe patterns.
Setting up and using the Downstream Key for titles.
Adjusting key edges and selecting fill signals.
Performing fade-in/fade-out for video signals.
Performing fade operations for DSK and audio signals.
How audio follows video transitions using the Mix/Wipe Lever.
Storing and recalling customized effect combinations.
Accessing and using eight preset special mode effects.
Automating mix, wipe, and key transitions.
Demonstrates specific digital effect combinations.
Accessing event memory via the AG-A800 editing controller.
Setting up the GPI interface for external control.
Configuring the RS422 interface for editing controller connection.
Setting up the RS232C interface for modem remote operation.
Details on signal types, connectors, and input/output capabilities.
Specifications for gain, S/N, dimensions, power, and operating conditions.
To Next Page
