33
NEW PASSWORD
4. To change the password in step 3-3 above, move the cursor from
OK to NEW PASSWORD, then press the CAM (SET) key. NEW
PASSWORD menu appears.
Notes:
• NEW PASSWORD menu is accessible only after the verifica-
tion has been completed.
• The following operations for NEW PASSWORD will not affect
to ON/OFF changing of the PRIVACY ZONE on the SPECIAL
1 menu.
The up-arrow mark appears indicating the first digit on the first
line.
4-1 Enter a new three-digit password in the same way as in steps
3-1 to 3-2.
4-2 The cursor moves to OK after all the three digits is entered.
Press the CAM (SET) key to move the cursor to the first digit
on the second line.
4-3 Enter the same password as you have entered on the first
line.
4-4 The cursor moves to OK. Press the CAM (SET) key. If the new
password is successfully entered, the screen returns to SPE-
CIAL 1.
4-5 Retry step 4-1 to 4-4. If the first entry for the password is dif-
ferent from the second one, the screen returns to the NEW
PASSWORD? menu.
4-6 To return to the SPECIAL 1 menu without changing the pass-
word, move the cursor to RET, then press the CAM (SET) key.
● Cleaning ON/OFF (CLEANING ON/OFF)
CLEANING
Built-in electric mechanical contacts are refreshed at regular inter-
vals (approx. 7 days) if CLEANING is set to ON.
A dry contract affects adversely picture quality and motors opera-
tion.
1. Move the cursor to CLEANING and select ON or OFF by moving
the joystick to the right or left.
ON: The contacts are cleaned as programmed for about 1
minute. “CLEANING” disappears when it is over.
OFF: No contact cleaning.
Note: Select OFF when the camera downloads or uploads the
preset data.
To Next Page
Loading...
