Panasonic WV-CW504S - Basic Operation

35
Screenshot 2
The setup mode changes to "ENABLE", and
the setup menu becomes ready to be set.
Basic operation
The description below explains how to operate the setup menu basically.
The operations in the setup menu are performed with the operation buttons (+ page 12) after call-
ing up the setup menu on the connected video monitor.
The operations in the setup menu can also be performed through the system controller (option).
Screenshot 1
Hold down the setting button for more than 2
seconds to call up the top screen of the setup
menu.
MODEL WV-CW504
CAMERA ID OFF
CAMERA
SYSTEM
BACK-FOCUS
SPECIAL
LANGUAGE
END SETUP DISABLE
Step 1
Press the up or down button to move the cur-
sor to "END".
Step 2
Press the right button to move the cursor to
"SETUP", and press the setting button to
change the setup mode from "DISABLE" to
"ENABLE".
MODEL WV-CW504
CAMERA ID OFF
CAMERA
SYSTEM
BACK-FOCUS
SPECIAL
LANGUAGE
END SETUP ENABLE
Step 3
Move the cursor to the item to be set, and
press the setting button.