Image
capture
size
1280x960 5 6 7 8 10 10 10 20 30 40
1280x720 7 8 10 10 10 20 20 30 40 50
800x600 9 10 10 20 20 30 30 50 50 50
VGA 10 20 20 30 30 40 50 50 50 50
640x360 20 30 40 50 50 50 50 50 50 50
400x300 30 30 40 50 50 50 50 50 50 50
QVGA 40 50 50 50 50 50 50 50 50 50
320x180 50 50 50 50 50 50 50 50 50 50
[Post alarm]
• Transmission interval
Select the transmission interval for the alarm image transmission to the FTP server from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps
• Default: 1fps
• Number of images
Select the number of images to be transmitted from the following.
1pic/ 2pics/ 3pics/ 4pics/ 5pics/ 6pics/ 7pics/ 8pics/ 9pics/ 10pics/ 20pics/ 30pics/ 50pics/ 100pics/ 200pics/
300pics/ 500pics/ 1000pics/ 1500pics/ 2000pics/ 3000pics
• Default: 100pics
• Recording duration
Approximate time to be taken to save the set “Number of images” with the set “Transmission interval” will
be displayed.
[Image capture size]
Select the image capture size of images transmitted when an alarm occurs from the following.
JPEG(1)/JPEG(2)/JPEG(3)
• Default: JPEG(2)
FTP periodic image transmission
[FTP periodic image transmission]
Select “On” or “Off” to determine whether or not to transmit images using the FTP periodic image transmission
function.
When “On” is selected, it is necessary to configure the settings of the FTP server.
• Default: Off
IMPORTANT
• When using FTP periodic image transmission, it is necessary to configure the schedule settings of FTP
periodic image transmission on the [Schedule] tab of the “Schedule” page. (®page 197)
[Directory name]
Enter the directory name where the images are to be saved.
For example, enter “/img” to designate the directory “img” under the root directory of the FTP server.
• Available number of characters: 1 - 256 characters
• Unavailable characters: " & ;
• Default: None (blank)
164 Operating Instructions
2 Settings
To Next Page
Loading...
