IMPORTANT
• When the [Overwrite] setting is changed from “Off” to “On”, if the remaining capacity of the SD memory
card is low, old images may be deleted in order to prepare to save new images.
[Next] button
If you click the [Next] button, the setup menu to set the schedule for recording into the SD memory card will
be displayed. (®page 59)
[Back] button
If you click the [Back] button, the schedule function type setup menu will be displayed. (®page 57)
• To configure the schedule settings:
Refer to page 197 for information about how to set the above screen.
[Set] button
If you click the [Set] button, setup will be completed.
[Back] button
If you click the [Back] button, the (video recording setup menu will be displayed. (®page 57)
Note
• Video recording is not performed if “SD memory recording” is not selected in the “Schedule mode”.
2.3.2.9 Schedule: Configure FTP periodic image transmission (FTP
periodic image transmission setup menu)
The FTP periodic image transmission is configured in this section.
Operating Instructions 59
2 Settings
To Next Page
Loading...
