Panasonic WV-S3511L - Product Specifications; Basic Specifications

25
• Basic
WV-S3531L, WV-S3511L
WV-S3532LM, WV-S3512LM
WV-S3131L, WV-S3111L
Power source *
1
: PoE (IEEE802.3af compliant)
Power consumption *
1
: PoE DC 48 V : 80 mA/Approx. 3.8 W (Class 2 device)
Operating environment
Ambient operating temperature:
Ambient operating humidity:
S3531
S3511
–30 °C to +50 °C {–22 °F to +122 °F}
(Power On range: –20 °C to +50 °C
{–4 °F to +122 °F})
S3532
S3512
–40 °C to +60 °C
{–40 °F to +140 °F} *
2
(Power On range: –20 °C to +60 °C
{–4 °F to +140 °F})
10 % to 100 % (no condensation)
0 °C to 40 °C {32 °F to 104 °F}
10 % to 90 % (no condensation)
Storage environment
Storage temperature:
Storage humidity:
–30 °C to +60 °C {–22 °F to +140 °F}
10 % to 95 % (no condensation)
Built-in microphone: Nondirectional electret condenser microphone
Waterproof *
3
: IP66 (IEC60529), Type 4X (UL50),
NEMA 4X compliant
None
Shock resistance: IK10 (IEC62262) None
Dimensions: ø109 mm × 53 mm (H)
{ø4-9/32 inches × 2-3/32 inches (H)}
Dome radius 27 mm {1-1/16 inches}
ø104 mm × 51 mm (H)
{ø4-3/32 inches × 2 inches (H)}
Dome radius 27 mm {1-1/16 inches}
Mass: Approx. 410 g {0.91 lbs} Approx. 255 g {0.56 lbs}
Finish:
Main body:
Aluminum die cast, Light gray
Dome cover:
Polycarbonate resin, Clear
Main body:
ABS resin, Sail white
Dome cover:
Polycarbonate resin, Clear
Others: Tamper-resistant enclosure*
4
,
EN50155(Railroad standard),
IEC62236-3-2(EMC-Railway
applications),ECE-R10 (E
approval),EN50498 (EMC -
Product family standard for after-
market electronic equipment in
vehicles).
None
*1 Refer to our website (https://security.panasonic.com/support/info/ <Control No.: C0106>) for
further information about Power source and Power consumption information.
*2 In the environment where IR LED is always turned on or choose 60 fps mode , make sure that
the ambient operating temperature is between –40 °C and +50 °C {–40 °F to +122 °F}.
*3 Only when installation work is properly performed according to the Installation Guide and
appropriate waterproof treatment is performed.
*4 Use a component that has a structure with which screws that are accessible after installation
cannot be screwed or unscrewed using an ordinary screwdriver.
Specifications