11.2 Configure the settings relating to JPEG images
[JPEG/H.264]
Click the [JPEG/H.264] tab on the “Image” page. (®page 32, page 34)
JPEG
Configure the settings such as “Refresh interval (JPEG)*”, “Image capture size” and “Image quality” on this
section. Refer to page 65 for further information about the settings relating to H.264 images.
“Live” page (Initial display)
Configure the settings relating to the JPEG images displayed on the “Live” page.
[Refresh interval (JPEG)*]
Select an interval to refresh the displayed JPEG image from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/ 6fps*/ 10fps*/ 12fps* (E model)/ 15fps*/ 30fps*
• Default: 5fps
Note
• When “On” is selected for “H.264 transmission”, the refresh interval may be longer than the set value
when any value with an asterisk (*) on the right is selected.
[Image capture size]
Select the image capture size to display the JPEG image on the “Live” page for the first time.
When “4:3” is selected for “Aspect ratio”
QVGA/ VGA/ 800x600
*1
/ 1280x960
*2
When “16:9” is selected for “Aspect ratio”
320x180/ 640x360/ 1280x720
*2
• Default:
– 1280x960
[Image quality]
Select the capture size of the JPEG image displayed initially on the “Live” page.
• Default: Quality1
Operating Instructions 63
11 Configure the settings relating to images [Image]
To Next Page
Loading...
