11.4.1 Configure the settings relating to image quality (“Image
adjust” setup menu)
Click the [Setup>>] button of “Image adjust” on the [Image quality] tab of the “Image” page. (®page 70)
The settings relating to image quality can be configured with the setup menu displayed in a newly displayed
window. When the values are changed, the changed values will be applied to the currently displayed image
on the [Image quality] tab.
[Super Dynamic(SD)]
Select “On” or “Off” to determine whether or not to activate the super dynamic function.
Operating Instructions 71
11 Configure the settings relating to images [Image]
To Next Page
Loading...
