[Pedestal level]
Adjust the black level of images by moving the cursor.
When the cursor is moved to the “+” direction, images will become brighter. When the cursor is moved to the
“-” direction, images will be darker. Click the [Reset] button to reset the color to the default.
• Default: 128
[Close] button
Click this button to quit the “Image adjust” setup menu.
11.4.2 Set mask areas
When “Off” is selected for “Super Dynamic(SD)”
and “Back light compensation (BLC)”, it is
possible to compensate for backlight by masking brighter areas.
76 Operating Instructions
11 Configure the settings relating to images [Image]
To Next Page
Loading...
