Panasonic WV-SP302 - H.264 image settings

42
Configure the settings relating to H.264 images [JPEG/H.264]
Click the [JPEG/H.264] tab on the "Image/Audio" page. (☞ Pages 22 and 23: How to display/operate the setup
menu)
[JPEG/H.264] tab will be displayed when "H.264" is selected for "Video encoding format".
ConfigurethesettingsrelatingtoH.264imagesuchas"Maxbitrate(perclient)","Imagecapturesize","Image
quality", etc. in this section.
Refer to page 46 and 41 for the settings relating to MPEG-4 images and JPEG images respectively.
[Video encoding format]
Select "H.264" or "MPEG-4" for the video encoding for-
mat.
H.264: H.264 will be set for the video encoding format.
The subsequent setting items will be for H.264. The
tab name will be changed to [JPEG/H.264].
MPEG-4: MPEG-4 will be set for the video encoding
format. The subsequent setting items will be for
MPEG-4. (☞ Page 46) The tab name will be
changed to [JPEG/MPEG-4].
Default: H.264
■ H.264(1) · H.264(2)
[H.264 transmission]
Select"On"or"Off"todeterminewhetherornotto
transmit H.264 images.
On: Transmits H.264 images.
Off: Does not transmit H.264 images.
Default:On
Note:
 • When"On"isselectedfor"H.264transmission"in
"H.264(1)", displaying of both H.264 images and
JPEG images on the "Live" page will become avail-
able.
 • When"On"isselectedfor"H.264transmission"in
"H.264(1)" and "H.264(2)", H.264 images are view-
able using other devices with each setting.
 • When"On"isselectedfor"H.264transmission"in
"H.264(1)" or "H.264(2)", the transmission interval of
JPEG images may sometimes become longer.
 • When"H.264"isselectedfor"Recording format",
it is impossible to transmit H.264 images with the
settings for "H.264(2)". In this case, the settings for
"H.264(2)" are invalidated.