EasyManua.ls Logo

Panasonic WV-SPN531A - Page 112

Panasonic WV-SPN531A
222 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Default: High
Note
This setting is also applied to the volume for [Audio recording] and [Audio detection].
IMPORTANT
If the [AGC(audio)] setting is changed after configuring [Audio detection], the volume of the sound that
is detected with [Audio detection] may change. In this case, make sure to check the [Audio detection]
setting.
[Mic input interval (Camera to PC)]
SFx311
SPN311
SPW311L
SPN531
SPW531L
SFN310
SPN310
Select an interval for audio reception from the following.
20ms/ 40ms/ 80ms/ 160ms
Default: 40ms
Note
When a shorter interval is selected, the delay time will be shorter. When a longer interval is selected,
audio interruption may be diminished even though the delay time will be longer. Select the interval
according to the network environment.
“Mic input interval (Camera to PC)” is unavailable when “AAC-LC” is selected for “Audio encoding
format”.
[Audio output volume (PC to Camera)]
SFx311
SPN311
SPW311L
SPN531
SPW531L
Select a volume level on the camera to hear audio transmitted from the PC.
High/ Middle/ Low
Default: Middle
[Audio output interval (PC to Camera)]
SFx311
SPN311
SPW311L
SPN531
SPW531L
Select an interval for audio transmission from the following.
160ms/ 320ms/ 640ms/ 1280ms
Default: 640ms
Note
When a shorter interval is selected, the delay time will be shorter. When a longer interval is selected,
audio interruption may be diminished even though the delay time will be longer. Select the interval
according to the network environment.
Audio may temporarily be interrupted and noise may be heard when multiple users are accessing the
camera concurrently. It may be possible to diminish the interruption or noise by setting a longer interval
for “Audio output interval (PC to Camera)”.
Audio may sometimes not be heard depending on the network environment.
[Audio output duration]
SFx311
SPN311
SPW311L
SPN531
SPW531L
Configure the maximum duration for each time audio is outputted.
1min/ 2min/ 3min/ 5min/ 10min/ 20min/ 30min/ 1h
Default: 5min
Note
Audio output stops when the specified time has passed. To turn the audio transmission function on,
click the Audio output button again.
112 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]

Table of Contents

Other manuals for Panasonic WV-SPN531A

Related product manuals