down for about 5 seconds. Wait about 3 minutes after releasing the button. The camera will start up
and the settings including the network settings will be initialized. Do not turn off the power of the unit
for about 3 minutes after turning on the power.
• The notification function allows users to notify errors to the destinations specified in “E-mail
notification” - “Destination E-mail address” and “Panasonic alarm protocol notification” - “Destination
server address” in the [Notification] tab on the “Alarm” page when an error occurs such as having no
SD memory card inserted after rebooting or inserting a locked SD memory card. (®page 115,
page 117)
176 Operating Instructions
19 Maintenance of the camera [Maintenance]
To Next Page
Loading...
