Panasonic WV-SW598APJ

To Next Page

To Previous Page

6. Select “Place all certificates in the following store”, and click “Browse...”.

7. Select “Trusted Root Certificate Authorities”, and click “OK”.

186 Operating Instructions

17 Configuring the network settings [Network]

Main Page

Table of Contents4
Monitor Images on a PC7
Monitor Images from a Single Camera7
About the "Live" Page9
Monitor Images from Multiple Cameras16
Monitor Images on a Cellular Phone/Mobile Terminal17
Monitor Images on a Cellular Phone17
Monitor Images on a Mobile Terminal20
Record Images on the SD Memory Card Manually28
Action at an Alarm Occurrence30
Alarm Type30
Transmit Images Onto an FTP Server32
Transmit an Alarm Image at an Alarm Occurrence (Alarm Image Transmission)32
Transmit Images at a Designated Interval or Period (FTP Periodic Image Transmission)32
Save Images on the SD Memory Card When Images Fail to Transmit Using the FTP Periodic Image Transmission Function33
Display the Log List34
When "JPEG" Is Selected for "Recording Format" of the SD Memory Card34
When "H.264(1)" or "H.264(2)" Is Selected for "Recording Format" of the SD Memory Card37
Playback of Images on the SD Memory Card41
When "JPEG" Is Selected for "Recording Format" of the SD Memory Card41
When "H.264(1)" or "H.264(2)" Is Selected for "Recording Format" of the SD Memory Card44
About the Network Security46
Equipped Security Functions46
Display the Setup Menu from a PC47
How to Display the Setup Menu47
How to Operate the Setup Menu49
About the Setup Menu Window51
Configure the Basic Settings of the Camera [Basic]53
Configure the Basic Settings [Basic]53
Configure the Internet Settings [Internet]57
Configure the Settings Relating to the SD Memory Card [SD Memory Card]59
Access Copy Images Saved on the SD Memory Card Onto the PC [SD Memory Card Images]69
Configure the Settings Relating to the Logs [Log]78
How the Logs and Images Are Saved Depending on the Settings for "Alarm80
How the Logs and Images Are Saved Depending on the Settings for "Manual/Schedule81
How the Logs and Images Are Saved Depending on the Settings for "FTP Error83
Configure the Settings Relating to Images and Audio [Image/Audio]84
Configure the Settings Relating to the Image Capture Mode [JPEG/H.264] (SW598A/ SW598APJ/SC588A)84
Configure the Settings Related to the Aspect Ratio (SW397B/SC387A)84
Configure the Settings Relating to JPEG Images [JPEG/H.264]86
Configure the Settings Relating to H.264 Images [JPEG/H.264]88
Configure the Settings Relating to the Camera Operations [Cam. Function]95
Configure the Settings Relating to Images and the Preset Positions [Image/Position]99
Configure the Settings Relating to Image Quality ("Image Adjust" Setup Menu)100
Set Mask Areas107
Configure the Settings Relating to the Preset Positions ("Preset Position" Setup Menu)110
Configure the Settings Relating to the Auto Pan Function ("Auto Pan" Setup Menu)113
Configure the Settings Relating to Patrol ("Patrol" Setup Menu)115
Configure the Settings Relating to Auto Track ("Auto Track" Setup Menu)117
Configure the Settings Relating to Direction ("Direction" Setup Menu)123
Configure the Settings Relating to the Privacy Zone ("Privacy Zone" Setup Menu)124
Configure the VIQS Setting ("VIQS" Setup Menu)126
Configure the Settings Relating to Audio [Audio]129
Configure the Multi-Screen Settings [Multi-Screen]132
Configure the Alarm Settings [Alarm]134
Configure the Settings Relating to the Alarm Action [Alarm]134
Configure the Settings Relating to the Camera Action on Alarm Occurrence [Alarm]136
Configure the Settings Relating to Preset Per Sender ("Preset Per Sender" Setup Menu)137
Configure the Settings Relating to the Alarm Image [Alarm]138
Configure the Settings Relating to H.264 Recording [Alarm]140
Configure the Settings Relating to the Alarm Output Terminal [Alarm]141
Change the aux Name [Alarm]142
Configure the VMD Settings [VMD Area]143
Configure the Settings Relating to the Audio Detection [Audio Detection]147
Configuration of the Settings Relating to the E-Mail Notification [Notification]149
Configure the Settings Relating to Panasonic Alarm Protocol [Notification]151
Configure the Setting Relating to the Image Recognition [Advanced Func.]154
Configure the Settings Relating to the XML Notification [XML Notification]154
Configure the Settings Relating to the Authentication [User Mng.]156
Configure the Settings Relating to the User Authentication [User Auth.]156
Configure the Settings Relating to the Host Authentication [Host Auth.]157
Configure the Settings Relating to the Priority Stream [System]159
Configure the Settings of the Servers [Server]161
Configure the Settings Relating to the E-Mail Server [E-Mail]161
Configure the Settings Relating to the FTP Server [FTP]162
Configure the Settings Relating to the NTP Server [NTP]163
Configuring the Network Settings [Network]166
Configure the Network Settings [Network]166
Configure the HTTPS Settings174
Generation of the CRT Key (SSL Encryption Key)175
Generation of the Self-Signed Certificate (Security Certificate)176
Generation of CSR (Certificate Signing Request)178
Installation of the Server Certificate179
Configuration of the Connection Protocol180
Access the Camera Using the HTTPS Protocol181
Install the Security Certificate181
Configure the Settings Relating to DDNS [DDNS]188
Configuration of the DDNS Service (Example of the "Viewnetcam.com" Service)189
When Using the "Viewnetcam.com" Service191
Procedure to Register Information for the "Viewnetcam.com" Service191
Checking the Information Registered for the "Viewnetcam.com" Service193
When Using "Dynamic DNS Update193
When Using "Dynamic DNS Update(DHCP)193
Configure the Settings Relating to SNMP [SNMP]194
Configure the Settings Relating to the FTP Periodic Image Transmission195
Trans.]195
Configure the Schedule Settings of the FTP Periodic Image Transmission196
Trans.]196
How to Set the Schedules197
How to Delete the Set Schedule198
Configure the Settings Relating to the Schedules [Schedule]200
Maintenance of the Camera [Maintenance]203
Check the System Log [System Log]203
Upgrade the Firmware [Upgrade]203
Check the Status [Status]205
Reset the Settings/Reboot the Camera [Default Reset]206
Number of Users that Can Concurrently Access the Unit208
Using the CD-ROM209
About the CD Launcher209
Installing Panasonic "IP Setting Software210
Installing the Manuals211
Installing the Viewer Software211
Configure the Network Settings of the Camera Using the Panasonic "IP Setting Software212
About the Displayed System Log214
Troubleshooting218
Directory Structure of Drive B231

Panasonic WV-SW598APJ - Page 186

Table of Contents

Related product manuals