Pandigital KTC Quick Start Guide

Digital Photo Frame (DPF) Mode
Simply touch the frame in the upper right
corner to acvate the PanTouch interface
and access the touch menus.
PanTouch Interface
Connect to Digital Cable
1. Power OFF the KTC.
2. Connect the Coaxial RF cable from your digital cable
(wall) or from the cable box to the TV port on the
back of the KTC.
3. Power ON the KTC.
4. Press the SOURCE buon on the remote control.
5. Use the CH+ and CH- to highlight TV, and then
press ENTER.
1. Press the MENU buon on the remote control to
display the On Screen Display (OSD) menu.
2. Press VOL+ or VOL- to highlight the TV opon.
3. Press CH- to highlight TUNER MODE and then press
VOL+ to select Cable.
4. Press CH- to highlight AUTO SCAN.
5. Press VOL+ to highlight START TO SCAN and then
VOL+ again to start the scan which searches for
strong channel signals within range.
When the scan finishes you can begin to watch TV.
Inial Tuner Setup
Television Mode
TIP: The Television Secon in the User Guide shows other connecon opons (i.e., DVD player)
Browse Channels
Press CH+ and CH- to scroll through the channels.
(The only channels available are those on the scanned list.)
Create Favorite Channels List
1. Press the MENU buon on the remote control.
2. Press VOL+ or VOL- to highlight the TV opon.
3. Press CH- to highlight Favorite, and then press ENTER.
4. Press CH+ or CH- to scroll through the list of channels and press
ENTER on the channels you want to add to the Favorites list.
Browse Favorites List
1. Press the FAV CH buon on the remote control.
2. Press CH+ or CH- to highlight the channel you
want to view, and then press ENTER.
Refer to the Television secon in the KTC User Guide
for full TV features and funconality
Enter DPF Mode
1. Press the SOURCE buon on the remote control.
2. Use the CH+ and CH- to highlight DPF, and then
press ENTER.
Acvate the PanTouch interface, touch BACK, and then touch HOME.
or
Press EXIT on the remote control unl the HOME screen is displayed.
Access the HOME Screen
Insert your Memory Card or USB Flash Drive
The media slots are on the le side panel.
Aer inserng your memory card or flash drive,
the photo slideshow will automacally begin
displaying your photos.
Refer to the Digital Photo Frame secon in the
KTC User Guide for full DPF features and funconality
1
2
3
4
5
1
2
3
4
INPUT SOURCE
TV
AV
S-Video
Component
DPF
HDMI
PC
A slideshow of internal memory images
will automacally begin to play.
Compact Flash slot
SD/MMC/MMC+/xD/MS slot
USB Host port
Audio Out jack
PANDIGITAL
®
CUSTOMER SUPPORT
Updated documentaon is
available on our website:
hp://www.pandigital.net
Call us toll free:
1-800-715-5354
The PanTouch interface is
a touch menu system with
the menu icons conveniently
hidden unl you touch the
acvaon point.
use for
DPF
funcons
Using the KTC
Remote Control
use for
TV
funcons
use for
TV
funcons
Mini USB Device port

Pandigital KTC Specifications

General

Brand	Pandigital
Model	KTC
Category	Kitchen Entertainment Center
Language	English