• Windows 10 system: When the “DVD RW driver” window pops up from the right top corner
of computer desktop, click anywhere in the window, then click “Autorun.exe” to run the
installation procedure.
Note: • Some computers may be unable to auto play the CD beacase of system
configuration. Please double click "Computer" icon, find "DVD RW driver", then
double click "DVD RW driver" to run the installation procedure.
5. Click on the “I agree” button on the right buttom corner after reading the license agreement
and enter into driver installation interface.
6. Please click on the “One-click installation” button in Method II and install driver software.
Note :• You can put your mouse cursor in the “One-click installation” button to check the
popup information in order to confirm if the current printer is the one you need to
install through IP address before you click the button.
• You can check the printer IP address through “Network configuration page” (Please
see Chapter 12.4 for how to print).
• Click on the “One-click installation” button to enter installation process if your software has
searched only one printer. The process may need some time, and the duration is related to
your computer configuration. Please wait patientl .
To Next Page
Loading...
Need help?
General
