9. The installation software will search the printer automatically and the searching process
may need some time.
10. After finishing searching, select the printer that needs to be connected and click “Next”
Note: • If the printer you need to connect is not in the list of printers searched, please
click “Refresh” to search again.
• When the printer IP address changes under printer driver installed with host ID ,
you can also directly print without re-installing the driver. If you need to install the
printer driver with the host ID, please check the option "Install the printer in the list
with host ID".
• If IP address or host name is added manually, you need to know the IP address
of the printer connected or host name. If they are not made clear, please print the
“NetConf Pg” and view “IP Address” and “Host name” (Please refer to Chapter 12.4).
8. The software installs the driver automatically and the installation process may need some
time. The duration is related to your computer configuration, please wait patiently.
9. After the installation, click “Print &Test Page” button. If your printer prints the test page
successfully, it means that you have installed the driver correctly.
3.1.2.3. Installation by wireless network connection mode
Wireless network connection type is divided into basic structure mode and Wi-Fi Direct
mode (please refer to Chapter 5 for details).
To Next Page
Loading...
Need help?
General
