II. Set the e-mail group
1. Log in the embedded Web server (please refer to Chapter 6.1 for login method).
2.
Click “Settings”, “Machine Settings” and then “E-mail Group” to enter the setting interface of
e-mail group.
3.
Click “Create” to pop out a window as below and edit the group name and check the e-mail
address to be added in the contact name (e-mail address) listbox, and then click "Apply".
Note：
• If some groups have been created, you may click to check a corresponding
group to add the newly created e-mail address into it.
Log in the embedded Web server (please refer to Chapter 6.1 for login method).
Click “Settings” – “Machine settings” – “System”.
1.
2.
3.
Click "Create" to pop out a window as below and edit the contact name and input the e-mail
address, and then click "Apply".
I. Set the E-mail address book
To Next Page
Loading...
Need help?
General
