Pantum P2600 Series User Manual

46
1) Use WPS method to perform steps below to start wireless network on printer. (Please refer to
Chapter 5.1.2 for detailed WPS configuration)
2) Judge if the printer is successfully connected according to the status of Wi-Fi indicator on printer.
If configuration failed, please click “Previous” to configure again; if configuration succeeded, please
click “Done” to complete configuration.
Note：
• If the printer cannot be used normally after wireless network setup is finished, please
install the drive again.

Pantum P2600 Series Specifications

General

Brand	Pantum
Model	P2600 Series
Category	Printer
Language	English