3） Automatic duplex printing with optional tray
Before printing, please make sure a certain volume of medium has been loaded into
the optional tray, and no medium is inside the standard input tray or multifunctional
input tray; or make sure the user set optional tray as the paper source.
Note: The optional tray supports automatic duplex printing of common paper only. Do
not put any special printing medium into the option tray.
The steps of automatic duplex printing are listed as below (this chapter applies to
the windows system only)
Step1: Open the task to be printed from an application program (like notepad).
Step2: Select “printing” in “document” menu.
To Next Page
Loading...
