Materials :
1. 5mm Foamboard/ Depron/ Polyfoam
2. 2mm Plywood
3. hot glue, UHU glue, CA glue
4. laminating film
5. Mica plastic 0.3mm
6. Paper card
Electronics (EDF)
- 2x FMS EDF 12 blade 1900kv
- 2x 80A ESC Hobbywing Skywalker
- 4x Battery Lipo 3S 2200mah (6S setup)
- 7 x 9 gram servos (metal micro servo)
Smoking Effect :
- EDF 50mm
- 2S Battery 1000mah
Specs :
1. Wingspan 1700 mm / 67 inches
2. Flying weight : 3600 grams/ 127 oz
3. Wing loading : 80.4 gram/dm2 - 26.4 oz/sq.ft.
4. Wing cube loading : 12
5. Wing Area : 44.80 dm2 / 694 sq.in.
6. CG : 9 cm / 3.5 inch from leading edge
Designed by Julius Perdana 2021
paper-replika.com
1700mm
Model : 39/2023
Build Instructions :
1. paper-replika.com
2. youtube channel : Julius Perdana
Pusher
- 2X DXW 3536 1200kv
- 2x 50A ESC
- 3S Lipo 2200 mAh X2
- 9x6x3 Prop
To Next Page
Need help?
General
