Filter installation instructions
1.Take out the filter from the plastic bag ,and wash&soak it with
cold water.
2.Put the filter into the filter tray,then align to the buckle ,then
press down to lock it.
3.Align one side of the filter plate to the groove properly following
up the instruction to assemble it.
Connect to the power supply for use
1.Connect the USB power cable to the adapter DC5V(>=1A），then
plug adpter to the power socket (AC110-220V),fountain will start
to work.
-04-
!
(Tips:Suggest to sort the power
cable with the zip tie,and place
it behind the fountain to avoid
pet chewing and entanglement
To Next Page
Loading...
