Need help?Do you have a question about the PAPILLON LS5T-52A and is the answer not in the manual?
General| Brand | PAPILLON |
|---|---|
| Model | LS5T-52A |
| Category | Log Splitter |
| Language | English |
Operate log splitter on dry, solid, level ground, free from obstructions and well-lit.
Avoid loose clothing; wear protective gloves, non-skid footwear, and hair covering.
Always wear safety goggles as foreign objects can cause permanent eye damage.
Ensure adequate circuit protection, ground connection, and avoid touching plug prongs.
Allow only one operator; keep bystanders, children, and pets away from the work area.
Do not straddle or reach across splitting area; keep hands away from moving parts.
Designed for operating temperatures +5°C to 40°C and altitudes up to 1000m.
Connect to standard 230V/50Hz supply with protection devices and RCD.
Ensure air can go in/out for smooth operation and tighten before moving to prevent leaks.
Do not adjust; it's pre-set and sealed to prevent injury or machine damage.
Features 'ZHB' control requiring both hands; unit freezes if either hand is removed.
Set logs firmly, avoid splitting on upper part, break in grain direction, do not split two logs.
Release controls, insert wedge wood, push it under the jammed log to free it.
Replace oil every 150 hours; unplug, drain, refill with specified oil.
Sharpen the wedge with a fine-toothed file to smooth burrs or crushed areas.
Check log position, size/hardness, or wedge sharpness for resolution.
Check hydraulic oil level, air in system, or unauthorized pressure setting.
Check bleed screw, oil drain bolt tightness, or valve/seal wear.
To Next Page