Need help?Do you have a question about the Parasound AVC-2500 and is the answer not in the manual?
General| Analog Audio Inputs | 6 |
|---|---|
| Digital Audio Inputs | 3 (2 Coaxial, 1 Optical) |
| Remote Control | Yes |
| Weight | 28 lbs |
| Type | AV Controller |
| Frequency Response | 20Hz - 20kHz |
| Audio Decoding | Dolby Digital, DTS |
| Video Inputs | 4 Composite |
| Video Outputs | 2 Composite |
| Inputs | Multiple analog and digital |
| Outputs | Multiple analog and digital |
Guidelines for optimal placement, avoiding direct sunlight, heat, and moisture.
Connects analog line-level sources to six audio/video inputs, supporting composite or S-video.
Details connections for using Video 6 input/output for VCR recording and playback.
Connects analog line-level sources to six audio-only inputs.
Accepts six channels of processed analog output from DVD players or processors.
Overview of the ninety-three rear panel connectors and terminals.
Connects analog line-level sources to six audio/video inputs.
Details connections for using Video 6 input/output for VCR recording and playback.
Connects analog line-level sources to six audio-only inputs.
Explains connecting component video signals (Y, Cb, Cr) for highest quality video.
Details the eight digital input connections and their assignment.
Details six inputs with composite and S-video connectors, and signal conversion capabilities.
Describes Cinema mode, including Dolby Digital, DTS, PCM, and Analog decoding.
Details Dolby Digital and DTS decoding for music playback.
Details Dolby Digital decoding in Music ASP mode.
Details DTS decoding in Music ASP mode.
Details Dolby Digital, DTS, PCM, and Analog decoding for party listening.
Details mono decoding for Dolby Digital, DTS, PCM, and Analog signals.
Details Dolby Digital decoding for stereo playback.
Guidelines for placing front left and right speakers for optimal sound.
Guidance on placing the center speaker for dialog reproduction and blending.
Placement advice for conventional surround speakers to create ambient effects.
Placement instructions for dipole surround speakers to minimize localization.
An abbreviated version of setup procedures for day-to-day operation.
Accesses advanced setup operations like DC trigger assignment and OSD settings.
Explains the segregation of setup menus into basic and complete categories.
Guides on programming input sources with digital inputs and ASP modes.
Details how to match audio sources with digital inputs and ASP modes.
Step-by-step instructions for assigning digital input and ASP mode to a source.
Covers renaming inputs, assigning component video, and setting trigger sources.
Procedure to rename input sources using a library of popular component names.
Instructions for creating custom names for inputs or radio station call letters.
Assigns component video sources to expand video switching capability.
Steps to assign a component video input to a source input.
Adjusts signal level relative to other inputs for consistent loudness.
Sets analog input levels to prevent distortion from overloading converters.
Procedure to manually adjust input source levels using transient peaks.
Configures bass management for front speakers based on their frequency response.
Configures bass management for the center speaker.
Configures bass management for the subwoofer, including LFE routing.
Adjusts bass limiter to prevent woofer distortion or damage.
Uses ACM-2500 microphone for automatic adjustment of channel levels and delays.
Explains manual calibration using internal noise generator or external source.
Procedure for manual channel level calibration using the internal noise generator.
Automatically calibrates channel delay times using the ACM-2500 microphone.
Procedure for manually setting channel delay times based on speaker distance.
Configures on-screen display for composite, S-video, and component outputs.
Programs external DC triggers to activate based on various system events.
Assigns DC trigger activation to specific system events like power or source selection.
Instructions for programming infrared commands from other remotes.
Guides on programming macro buttons for one-touch operation of multiple commands.
To Next Page