Need help?Do you have a question about the Parasound Ztuner and is the answer not in the manual?
Tuning Range| FM tuning range | 87.5 MHz to 108 MHz |
|---|---|
| AM tuning range | 520 kHz to 1610 kHz |
Sensitivity| FM sensitivity mono | 10.8 dBf |
|---|---|
| FM sensitivity stereo | 36.9 dBf for 50 dB of quieting |
| AM sensitivity IHF | 10 uV/m |
Signal and Noise| Signal to noise ratio stereo | 74 dB |
|---|---|
| Signal to noise ratio IHF-weighted | 65 dBf |
| Capture ratio | 1.5 dB |
Selectivity| FM selectivity | 80 dB alternate channel |
|---|---|
| AM selectivity | 30 dB |
Frequency Response| FM frequency response | 30 Hz to 15 kHz +/- 1 dB |
|---|---|
| AM frequency response | 20 Hz to 4.5 kHz +/- 2 dB |
Harmonic Distortion| Total harmonic distortion FM mono | < 0.08 % |
|---|---|
| Total harmonic distortion FM stereo | < 0.18 % |
| Total harmonic distortion AM | < 0.5 % |
Other Specifications| FM stereo separation 1 kHz | 50 dB |
|---|---|
| FM stereo separation 10 kHz | 40 dB |
| AM suppression | 60 dB |
Power and Current| AC power consumption | 20 watts |
|---|---|
| 12V trigger current requirement | 15 mA |
Weight and Dimensions| Dimensions | 241 x 254 x 50mm, 44.1mm panel only |
|---|---|
| Net weight | 1.83 kg |
| Shipping weight | 3.1 kg |
Key safety guidelines covering operation, maintenance, and handling to prevent hazards.
Information on setting the voltage selector for correct AC line voltage before operation.
Configuring automatic turn-on via 12V trigger or manual control using the front panel button.
Functions and operation of the Power and Band buttons on the front panel.
Using the Mono button, Tune knob, and Mode button for station selection and tuning.
Setting the remote handset's zone code to match the Ztuner for independent control.
Using Tune <>, Mode, Band, and Mono keys for station selection and audio settings.
Diagnosing and resolving issues with audio output, FM, and AM reception.
To Next Page
